Dell 2355dn User Manual page 84

Use papers printed with heat-resistant inks which have been designed for use in xerographic
copiers. The ink must withstand temperatures of 180° C (356° F) without melting or releasing
hazardous emissions. Use inks that are not affected by the resin in the toner or the silicone in the
fuser. Inks that are oxidation-set or oil-based should meet these requirements; latex inks might
not. If you are in doubt, contact your paper supplier.
Preprinted papers such as letterheads must be able to withstand temperatures up to 180° C (356°
F) without melting or releasing hazardous emissions.
Printing on a Letterhead paper
Check with the manufacturer or vendor to determine whether the preprinted letterhead paper that
you have chosen is acceptable for laser printers.
Page orientation is important when printing on a letterhead paper. Use the following table for help
when loading a letterhead paper in the print media sources.
Print Media Source
Print Side
tray 1 (standard tray) Print side face down for simplex (single
sided) printing
optional tray 2
Print side face up for duplex printing
Top of Page
Portrait
Front of tray
Landscape
Left side of tray
83