Envelopes - Dell 2355dn User Manual

Selecting Transparencies
The printer can print directly on transparencies which have been designed for use in laser printers.
Print quality and durability depends on the transparency used. Always print samples on the
transparencies you are considering before buying large quantities.
Check with the manufacturer or vendor to determine whether your transparencies are compatible
with laser printers that heat transparencies to 180° C (356° F). Use only transparencies that are
able to withstand these temperatures without melting, discoloring, offsetting, or releasing
hazardous emissions.

Envelopes

Try a sample of any envelopes you are considering using with the printer before buying large
quantities. See "Using the MPF (Multi purpose feeder)" for instructions on loading an envelope.
When printing on envelopes:
• To achieve the best possible print quality, use only high-quality envelopes that are designed
for use in laser printers.
• For best performance, use envelopes made from 75 g/m
2
to 90 g/m (24 lb bond) weight for the MPF as long as the cotton content is 25 percent or
less.
• Use only new, undamaged envelopes.
• For best performance and to minimize jams, do not use envelopes that:
– Have excessive curl or twist
– Are stuck together or damaged in any way
– Contain windows, holes, perforations, cutouts or embossing
– Use metal clasps, string ties, or metal folding bars
– Have an interlocking design
– Have postage stamps attached
– Have any exposed adhesive when the flap is in the sealed or closed position
– Have nicked edges or bent corners
– Have rough, cockle, or laid finishes
• Use envelopes that can withstand temperatures of 180° C (356° F) without sealing,
excessive curling, wrinkling, or releasing hazardous emissions. If you have any doubts
about the envelopes you are considering using, check with the envelope supplier.
• Adjust the width guide to fit the width of the envelopes.
• Load an envelope with the flap side down and with the stamp area on the top left side. The
end of the envelope with the stamp area enters the MPF first.
2
(20 lb bond) paper. You can use up
85