Dell 2355dn User Manual page 301

Display message
Fuser Error
Low Heat Error
Over Heat Error
Fuser unit Error
Hub is not supported
Invalid Cartridge
IP Conflict
Load the following media
in the [yyy]
Paper Size: [zzz]
Paper Type: [xxx]
Continue / Close
LSU Motor Error
LSU Fan Locked
LSU Hsync Error
Main Motor Locked
Memory Error
Memory Full
Network Cable Error
Network Card Error
Oversize Document
Paper jam in MPF
Paper jam in Tray 1
Paper jam in optional
Tray 2
300
Meaning
There is a problem in the fuser unit.
USB hub device should not be connected with
USB memory port.
The toner cartridge you have installed is not for
your printer.
The IP address is used by another user.
There is no paper in the tray.
A problem has occurred in the LSU.
There is a problem in the main motor.
Memory failure.
The memory is full.
The network cable is disconnected.
The network card is not installed.
Original paper is too long for scanner.
Paper has jammed in the feeding area of the
paper tray.
Suggested solutions
Unplug the power cord and plug it back in. If
the problem persists, please call for service.
Remove the USB hub device from USB
memory port.
Install a Dell-genuine toner cartridge, designed
for your printer.
Check the IP address or obtain a new IP
address.
Load paper in the tray. See "Loading Print
Media in the Paper Tray".
Unplug the power cord and plug it back. If the
problem persists, please call for service.
Unplug the power cord and plug it back. If the
problem persists, please call for service.
Unplug the power cord and plug it back. If the
problem persists, please call for service.
Delete unnecessary documents, and try again.
Connect the network cable. See "Connecting
the printer to the Network".
Install the network card.
Check original size.
Clear the jam.
See "Paper Feed Jam (tray 1)", "Paper Feed
Jam (optional tray 2)" or "MPF Jam".