Programming Punch Through - Universal Remote Control MX950 Programming Manual

Programming Punch Through

Punch Through allows you to set the same functions on all devices very quickly. You can punch through any
of the groups of buttons on the MX-950. In this exampe, the Power On and Power Off buttons on every page
and every device are set to punch through to the WATCH Power On and Power Off buttons, thus the user can
power off the system without returning to WATCH to press Power Off. Likewise, the Volume Up, Down and
Mute have been set as a group to punch through to the surround sound receiver. After programming, flags
remind the programmer that the buttons have been set to punch through.
1 Open the Punch Through window by clicking on the shortcut button in the toolbar or by selecting
Punch Through from the Program Menu.
2 Select the devices which you want to change programming by clicking on them
while holding down the CONTROL key on the keyboard. If you want them all
selected (normal for Volume Up, Down and Mute), simply click on the Select All
button. Any device you select will be HIGHLIGHTED in the "Punch To" list.
3 Select the device that has the codes you want used in the Punch From list.
4 Click on SAVE. Check the devices you programmed, you should see the red PT (Punch Through)
flag on every button affected on all the devices you programmed:
Punch Through
™
COMPLETE
CONTROL
35
M
X
9
5
0
A
U
R
O
R
A
C
O
L
O
R
L
C
D
C
O
N
T
R
O
L
S