Assembly; Unpacking - Horizon Fitness T72 User Manual

IMPORTANT..
READTHESE SAFETY INSTRUCTIONS BEFORE USE!
i_ I "_ i_ii
During the assembly process of the treadmill there are several areas that special attention must be paid.
It is very important to follow the assembly instructions correctly and to make sure aft parts are firmly
tightened. If the assembly instructions are not followed correctly, the treadmill could have frame parts that
are not tightened and will seem loose and may cause irritating noises. Thereshould be no side-to-side play
in the console masts or any forward and back play in the console assembly or handlebars. If there is any
play in these areas, the treadmill has not been properly assembled. Toprevent damage to the treadmill, the
assembly instructions must be reviewed and corrective actions should be taken.
UNPACKING
Placethe treadmill carton on a level flat surface.It is recommended thatyou place a protectivecoveringon
your floor. TakeCAUTION when handling and transporting this unit. Neveropen box whenit is on its side.
Oncethe banding straps have beenremoved,do not lift or transport this unit unless it is fully assembled
and in the upright folded position, with the lock latch secure.Unpack the unit whereit will be used. The
enclosedtreadmill is equippedwith high-pressureshocksand may spring openif mishandled. Nevergrab
hold of anyportion of the incline frame and attern_t to fit or movethe treadmill. FAILURE TOFOLLOW THESE
INSTRUCTIONS COULD RESULT IN INJURY!
Before preceeding,find your treadmill's serial number
model name located to the left Of
powerswitch and powercord and enter it in the space
MODEL NAMEINTHEBOXES BELOW:
* Referto the SERIAL N UMBER and MODEL NAME whencaring for service.
* Alsoenter this serial numberonyour WarrantyCard.