Troubleshooting - Heart R Ate - Horizon Fitness T72 User Manual

PROBLEM:
Thetreadmill circuit breakertrips during a workout.
$SLUTJON: Verifythe following:
• Make sure the treadmill is plugged into a dedicated 20-amp circuit.
• Verifythat you do not ha ve the machine on an extensioncord or surge protector
• Confirm that the machine is not plugged into a GFCI-equippefi outlet or on a circuit that has a GFCI-equippefloutlet on it.
PROBLEM:
The running belt does not stay centered during a workout.
$OLUT]OHi Verifythe following:
• Make sure the treadmill is on a level surface.
• Verifythat the belt is properly tightened and centered (Refer to the Adjustment section for detailed directions).
54
PROBLEM:
Operating speed appears inaccurate.
$OL UT]OH: Auto-cafibrate the treadmill:
• Poweron the treadmill and have the safety keyin position on the
console. Press and hold the elevation "+" and speed %" buttons for
approximately 5 seconds to enter the Engineering Mode. Theconsole
will beep and "ENGO"appears in the display.
• Press the Speed "+" or "-" button until "ENG2"appears in the display.
• Press, "ENTER"to select. Press, "START"to begin. Thetreadmill
running belt will begin to move automatically and the auto-calibration
sequence will properly set and store the speed values.
• Upon successful calibration, the treadmill will beep several times. The
console will automatically exit Engineering Mode and return to the
start-up screen.
i DO NOTstand onrunningbe!t while
i ca!ibrating-stand onthe guide
rails. Treadmillwill fluctuate between
i low and high SPeeds foi severai
_minutes until calibration is completel
TROUBLESHOOTING - HEART R ATE
Checkyour exerciseenvironment for sources of interference such as fluorescent lights, computers, undergroundfencing, home
security systems or appliances containing large motors. Theseitems may cause erratic heart rate readouts.
Youmay experiencean erratic readout under the following conditions:
° Gripping the heart rate handlebars too tighL Tryto maintain moderate pressure while holding onto the heart rate handlebars.
• Constant movement and vibration due to constantly holding the heart rate handlebars while exercising.If you are receiving
erratic heart rate readouts, try to only hold the grips long enough to monitor your heart rate.
• Whenyou are breathing heavily during a workout.
• Whenyour hands are constricted by wearing a ring.
• Whenyour hands are dry or cold. Tryto moisten your palms byrubbing them together to warm.
• Anyone with heavyarrhythmia.
° Anyone with arteriosclerosis orperipheral circulation disorder
• Anyone whoseskin on the measuring palm is especially thick.
Thefollowinginformationmaybe askedofyou when youcall. Please havetheseitemsreadilyavailable:
• ModelName
• SerialNumber
• Dateof Purchase (receiptor creditcardstatement)
In orderfor Customer T ech Supportto service yourtreadmilltheymayneedto ask detailedquestionsaboutthesymptoms that are
occurring.Some troubleshooting q uestionsthat maybe askedare:
• Howlong hasthis problembeenoccurring?
• Does this problemoccurwith every use?Witheveryuser?
• Ifyou arehearinga noise,doesit comefrom the frontor theback?Whatkind of noiseis it (thumping. g rinding,squeaking,
chirpingetc.)?
• Hasthe machine beenlubricatedand maintained per themaintenance schedule?
Answering theseand otherquestionswill givethe technicians theability to sendproperreplacement parts and theservicenecessary
togetyouandyourHorizon Fitnesstreadmillrunningagain]