Speakers - HP ENVY 14 SPECTRE Maintenance And Service Manual

Speakers

Description
Speakers (include speaker cables and wireless audio module antenna cables)
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Solid-state drive connector board cable (see
b. Card Reader board cable (see
c. Top cover (see
Remove the speakers:
1. Disconnect the wireless audio module antenna cables (1) from the terminals on the wireless
audio module.
NOTE:
audio module module "Main" terminal. The #8/Aux wireless audio module antenna cable is
connected to the wireless audio module module "Aux" terminal.
2. Release the wireless audio module antenna cables from the clips (2) and routing channels built
into the base enclosure.
46 Chapter 4 Removal and replacement procedures
Battery on page
Top cover on page
The #7/Main wireless audio module antenna cable is connected to the wireless
31), and then remove the following components:
Solid-state drive on page
Card Reader board cable on page
38)
Spare part number
672013-001
33)
35)