Horizon Fitness RCT7.6 Assembly & User's Manual page 10

A S SE MB LY ST E P 
HARDWARE BAG  CONTENTS :
10
BOLT (D) FLAT WASHER (E)
13 mm Qty: 4
Qty: 4
CONSOLE CABLE
CONSOLE MAST
ASSEMBLED IN STEP 4-D
A) Open HARDWARE BAG .
B) Place the CONSOLE on
CONSOLE MASTS.
C) Place 2 FLAT WASHERS (E) and
2 BOLTS (D) into side of left
CONSOLE MAST and CONSOLE
and lightly tighten.
D) Gently lift right side of the
CONSOLE to connect the
FLAT WASHER (E)
CONSOLE CABLE. Carefully tuck
BOLT (D)
wires in mast to avoid damage.
*NOTE: Do not pinch console
cable. Be sure the console cable
prongs are aligned and the ends
are tightly seated into each
other.
E) Repeat step C above to secure
the console to the RIGHT
CONSOLE MAST.
F) Tighten all bolts completely.*
* NOTE: Be careful not to pinch any
wires while assembling the masts.