Using The Toshiba Viewer - Toshiba e-STUDIO160 Service Handbook

5.4 Using the TOSHIBA Viewer

Using the TOSHIBA Viewer, you can download the firmware from the PC to this copier for updating.
Important: • Data to be downloaded should be stored in the same drive as the TOSHIBA Viewer
program. If the data is stored in a different drive (including a floppy disk or the drive of
another PC connected to the network), downloading may not be performed normally.
• Do not turn off the power of the copier and the PC while data is being updated. Data may
be damaged causing the copier not to operate normally.
(1) Start the TOSHIBA Viewer, and then Click "Setup" on the main welcome menu.
The Toshiba Setup screen appears.
e-STUDIO160/200/250 UPDATING THE FIRMWARE
Fig. 5-4-1
5 - 20 December 2002 TOSHIBA TEC