Using The Recovery Pwa; Using Main Recovery Pwa - Toshiba e-STUDIO160 Service Handbook

5.2 Using the Recovery PWA

Downloading procedures differ with the main data and the scanner data. Refer to the following sections:
• Main data: 5.2.1 Using the main recovery PWA (this page)
• Scanner data: 5.2.2 Using the scanner recovery PWA (on page 5-5)

5.2.1 Using main recovery PWA

Important: While downloading, do not turn off the power of the copier. Data may be damaged, caus-
ing the copier not to operate normally.
(1) On the main recovery PWA, install the ROM that stores data for the update.
Closely follow the ROM installation direction.
Main recovery PWA
(2) Turn off the power.
(3) Remove the rear cover.
e-STUDIO160/200/250 UPDATING THE FIRMWARE
ROM 2
Fig 5-2-1
Fig 5-2-2
5 - 2
Connector
ROM 1
Rear cover
05-02-01
05-02-02-1
December 2002 TOSHIBA TEC