Paper Transporting Jam At The Adf - Toshiba e-STUDIO160 Service Handbook

4.1.5 Paper transporting jam at the ADF

E71 Original feeding jam at the feeding area of the ADF
When original is left inside the ADF, remove it. If this error occurs frequently, the following items
should be checked.
[Two or more originals are fed simultaneously.]
Have too many originals been placed?
YES
NO
Are the original sheets curled or folded too much?
YES
NO
Are different-size originals placed together?
YES
NO
Is the separation pad stained?
YES
[The original does not reach the feed roller.]
Does the paper thickness satisfy the specifications?
NO
YES
Is the pickup roller or feed roller stained?
YES
NO
Is the transporting force of the pickup roller or the feed roller insufficient?
YES
e-STUDIO160/200/250 TROUBLESHOOTING
Reset the originals, following the specification.
Flatten and reset the originals.
Set only one-size originals.
Clean the separation pad.
Reset the originals, following the specification.
Clean the roller.
Replace the rollers.
4 - 22 December 2002 TOSHIBA TEC