Multifeed detection
Multifeed sensors
Printing
3-20
If Multifeed Detection has been enabled via the scanning application, you can
turn Multifeed Detection off for the rest of the current batch.
If Multifeed Detection has been enabled via the scanning application, you can
turn on or off any or all of the five scanner sensors. When the sensors are
selected, click OK to close the window.
If Printing has been enabled via the scanning application, you can temporarily
disable printing on all documents in a batch. This may be useful if rescanning a
stack of documents that have already been printed.
Once Printing is disabled, no documents will be printed on until the Printing
option is enabled.
If you want to disable printing for the first document in the batch, then your
scanning application should be set up to NOT automatically start scanning, so
this screen can be accessed and printing is disabled before you start scanning.
A-61670 December 2010