Kodak i5000 series User Manual page 29

Performing a self test
Count only mode
3-12
The scanner self test will test the image capture subsystem to ensure that is
functioning correctly.
You may want to count the number of documents entering the scanner without
actually scanning them.
1. Touch Count Only. The Count Only screen will be displayed.
2. Place the documents you want to count in the input elevator.
3. Press the Start/Resume button. When the scanner has scanned all
documents, the total number will be displayed.
4. Touch Cancel when finished to return to the Idle screen.
NOTE: When you press the Stop/Pause button, the feeder and transport
will stop. You can continue your Count only test by pressing the
Start/Resume button.
A-61670 December 2010