Kodak i5000 series User Manual page 31

Performing a Touchscreen
calibration
3-14
Touchscreen calibration is used to verify that the touch points on the
touchscreen are working correctly. The touchscreen is factory-calibrated and
should not be performed unless directed to do so by Technical Support.
1. Touch Calibrate. The Calibration screen will be displayed.
2. Select Touchscreen Calibration to display the Touchscreen Calibration
screen.
3. Touch Yes.
4. Using the pad of your finger, touch the target as it moves around the
screen.
5. When all points have been tested, the message Calibration succeeded
will be displayed.
6. When finished, the Idle screen will be displayed.
A-61670 December 2010