System Board Shield; Remove The Keyboard - HP EliteBook 2760p Maintenance And Service Manual

12. Lift the display straight up to remove it from the base enclosure (4).
Reverse this procedure to reassemble and install the display assembly.

System board shield

Description
System board shield
Before removing the system board shield, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Remove the battery (see
b. Remove the service access cover (see
c. Remove the WLAN module (see
d. Remove the WWAN module (see
e. Remove the keyboard (see
f. Remove the top cover (see
g. Remove the display assembly (see
66 Chapter 4 Removal and replacement procedures
Battery on page 41)
Service access cover on page
WLAN module on page
WWAN module on page
Keyboard on page 53)
Top cover on page 57)
Display assembly on page
Spare part number
649760-001
42)
48)
51)
63)