HP EliteBook 2760p Maintenance And Service Manual page 81

c. Remove the WLAN module (see
d. Remove the WWAN module (see
e. Remove the keyboard (see
f. Remove the top cover (see
g. Remove the display assembly (see
h. Remove the Bluetooth module (see
i. Latch assembly (see
j. Remove the speaker assembly (see
Remove the audio connector board:
1. Position the computer right-side up, with the front toward you.
2. Release the ZIF connector (1) that secures the audio board cable to the system board and
remove the audio board cable (2).
3. Remove the Phillips M2.0×3.5 screw (3) that secures the audio connector board to the base
enclosure and lift the board (4).
Reverse this procedure to install the audio connector board.
WLAN module on page
WWAN module on page
Keyboard on page
Top cover on page
Display assembly on page
Bluetooth module on page
Latch assembly on page
Speaker assembly on page
48)
51)
53)
57)
63)
68)
70)
71)
Component replacement procedures 73