HP EliteBook 2760p Maintenance And Service Manual page 77

Description
Bluetooth module
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Remove the battery (see
b. Remove the service access cover (see
c. Remove the WLAN module (see
d. Remove the WWAN module (see
e. Remove the keyboard (see
f. Remove the top cover (see
g. Remove the display assembly (see
Remove the Bluetooth module:
1. Position the computer right-side up, with the front toward you.
2. Lift the Bluetooth module (1) as far as the cable will allow.
3. Disconnect the Bluetooth module cable from the Bluetooth module (2) and remove the module.
Battery on page 41)
Service access cover on page
WLAN module on page
WWAN module on page
Keyboard on page 53)
Top cover on page 57)
Display assembly on page
Spare part number
537921-001
42)
48)
51)
63)
Component replacement procedures 69