HP EliteBook 2760p Maintenance And Service Manual page 66

c. Remove the keyboard (see
d. Remove the secondary memory module (see
Remove the top cover:
1. Turn the computer upside-down, with the front toward you.
2. Remove the two Torx 8M2.0×7.0 screws (1) located in the bottom feet. You do not need to
remove the feet.
3. Remove the two screw caps (2) and the two Torx 8M2.0x5.0 screws (3) located below the
battery bay.
4. Turn the computer right-side up, with the front toward you.
5. Open the display as far as possible.
6. Release the ZIF connector (1) that secures the audio cable to the system board and remove the
audio cable (2) from the ZIF connector.
7. Release the ZIF connector (3) that secures the TouchPad button cable to the system board and
remove the touchpad button cable (4) from the ZIF connector.
58 Chapter 4 Removal and replacement procedures
Keyboard on page 53)
Secondary memory module on page 56)