Kohler COMMAND CV17-745 Service Manual page 143

Kohler Engine Parts Call K&T 606-678-9623 or 606-561-4983
Figure 9-6. Removing Standard Element and
Precleaner.
3. Remove the element cover, element and
precleaner. See Figure 9-6.
Hex. Flange
Nuts (2)
Lower Mounting
Screws (Some
Models)
Figure 9-7. Removing Standard Air Cleaner Base.
4. Remove the two hex. flange nuts securing the
spitback cup, baffle or bracket, and air cleaner
base. See Figure 9-7. Two additional lower
screws must be removed if the engine contains a
lower air cleaner support bracket.
Figure 9-8. Removing Commercial Mower Element
and Precleaner.
Figure 9-9. Disconnect Breather Hose from Base.
5. Disconnect the breather tube from the nipple on
6. Remove the base and gasket while carefully
www.mymowerparts.com
the underside, or the hose from the base (as
equipped). See Figure 9-9.
pulling the rubber breather tube through the base.
Section 9
Disassembly
9
9.3