Troubleshooting - Denon DVM-1800 Operating Instructions Manual

III

17 TROUBLESHOOTING

W Are all the connections
W Are you following the instructions
n
Are the amplifier and speakers operating
If the DVM-1800 does not seem to be functioning
damaged. Turn off the power, unplug the power cord from the power outlet, and contact your store of purchase or nearest DENON sales office.
Symptom
Power does not turn on.
Playback does not start when PLAY button
is pressed.
Playback stops immediately.
Picture does not appear.
Sound is not produced or sound quality is
poor.
Menu playback of video
possible.
Picture is disturbed during
operation.
Buttons do not operate.
No subtrtles are drsplayed.
Audio (or subtitle) language does not switch.
Angle does not swatch.
Playback does not start when the title is
selected.
You have forgotten the password you have
set for the "Ratings" setting.
The disc IS not played wrth the audio or
subtitle language set as the default setting.
Picture is not displayed in 4:3 (or 16:9).
No messages appear on the screen when
buttons are operated.
Menu screen messages for the desired
language do not display.
Remote control unrt does not operate.
60
correct?
in the manual?
properly?
properly, check the table below. If this does not solve the problem, the DVM-1800 may be
Plug the power cord securely Into the power outlet
l
. Is there condensatron on the drsc or player? (Let stand for 1 or 2 hours.)
Discs other than DVDs. video CDs and musrc CDs cannot be played.
l
Disc is dirty Wipe off the dirt.
l
. Check the connections.
Set the TV's Input to "vrdeo".
l
Check the connections.
l
. Properly set the input of the TV, stereo, etc
Menu playback is not possrble with anythrng but video CDs wrth playback control.
CD's is not
l
Some disturbance is normal.
the search
l
Some operations are disabled for some drscs
l
Subtitles are not displayed for DVDs not containing subtitles.
l
Subtitles are turned off. Turn the subtitles settrng on.
l
The audro (or subtrtle) language does not switch for discs which do not Include multrple audro (or
l
subtitle) languages.
For some discs the audio for subtitle) language cannot be switched when the operation to switch It is
l
performed, but can be switched on the menu screens.
. The angle cannot be switched
multrple angles are only recorded for specrfrc scenes
. Check the "Ratrngs" setting
. Use the procedure descrrbed below to reset all the settrngs to the factory defaults.
In the stop mode, press and hold in the STILL/PAUSE, SKIP 044)
DVD player for at least 3 seconds. (Check that "lnrtialrzed" has turned off from the TV screen.)
. The drsc does not play with the selected audro or subtrtle language If that audro or subtitle language
IS not included on that DVD.
Set the "TV Aspect" default settrng to the proper settrng for the connected TV.
l
. Set the "On-Screen Messages"
. Check the default settrng for the disc language's menu language.
Check that the batteries are Inserted rn the proper "0" and "0" directions
l
. The batteries are dead. Replace them wrth new batteries.
. Pornt the remote control unit at the remote control sensor when operating It.
Operate the remote control unrt wrthin a drstance of 7 meters from the remote control sensor.
l
Remove the obstacle between the remote control unrt and remote control sensor.
l
Check
for DVDs which do not contarn multrple angles. In some cases
and OPEN/CLOSE buttons on the
default settrng to "On".
Page
10
-
8
9
10
10
-
21
22
38
-
-
36,38
39
45-47
-
44
52
49
44
17
17
17
17
17