Marking Scenes You Want To See Again - Denon DVM-1800 Operating Instructions Manual

0

10 MARKING SCENES YOU WANT TO SEE AGAIN

n Set marks at scenes you want to see agarn so that you can start playback from the marked position whenever you want.
During playback, press the MARKER button.
The marker screen appears.
l
"x" is displayed if the mark is not set.
l
Press the ENTER button at the scene you want to mark.
A number is drsplayed.
l
Up to five marks can be set.
l
' NOTES:
In some cases, subtitles may not be drsplayed at marked spots.
l
The marking function cannot be used for DVDs and video CDs for which the elapsed time is not shown on the drsplay during playback.
l
The marks are retained until the power is turned off or the disc is ejected.
l
The mark settings will be cleared when changing from the specified disc to a disc of a different disc number, or when the power is set to
l
the standby mode.
Use the 4 and F cursor buttons to select the mark number.
If the marker screen
l
1
MARKER button to display It.
* To play from the selected mark number:
Press the A cursor button or ENTER button.
The disc returns to the selected mark and playback starts.
* Clearing the selected mark number:
Press the CLEAR button.
The selected mark is cleared.
I
l-
not drsplayed during playback,
IS
Remote control unit
.
.
o Q-;
Remote control unrt \
press the
I
31