Connecting A New Bluetooth Device; External Devices; Bluetooth Operations - JVC KW-ADV790 Instructions Manual

Bluetooth operations -
®
For Bluetooth operations, it is required to connect the
Bluetooth Adapter (KS-BTA200) to the CD changer jack
on the rear.
• Refer also to the instructions supplied with the
Bluetooth Adapter and the Bluetooth device.
• Refer to the list (included in the box) to see the
countries where you may use the Bluetooth®
function.
To use aBluetooth device through the unit ("Bluetooth
PHONE" and "Bluetooth AUDIO") for the first time,
you need to establish Bluetooth wireless connection
between the unit and the device.
• Once the connection is established, it is registered in
the unit even if you reset your unit. Up to five devices
can be registered in total.
• Only one device can be connected at atime for each
source ("Bluetooth PHONE" and "Bluetooth AUDIO").
Connecting a new Bluetooth
device
Registration l[Pairing) methods
Use either of the following items in
menu to register and establish the connection with a
device.
• Select "Bluetooth PHONE" or "Bluetooth AUDIO" as
<Bluetooth>
the source to operate
Open
Make the unit ready to establish
anew Bluetooth connection.
The connection is established by
operating the Bluetooth device.
Sear(h
Make the unit ready to establish
anew Bluetooth connection.
The connection is established by
operating this unit.
register lIsing <Open>
To
Preparation:
Operate the Bluetooth device to turn on its Bluetooth
function.
Cellularphone/audio player
1 ·
2
3
_
<Bluetooth>
4
menu.
27
Make sure "New Device" is selected. If not, press
[..] or to select it.
[T]
• You can also use AV MENU on the monitor panel.
Enter a PIN (Personalldentifkation
Number)* (ode to the unit.
• You can enter any number you like (l-digit to
16-digit number).
*
Some devices have their own PIN code. Enter the
specified PIN code to the unit.
Continued on the next page

EXTERNAL DEVICES