Playing Jpeg Files - JVC KW-ADV790 Instructions Manual

Playing MPEG1/MPEG2 files
• This unit can play back MPEG1/MPEG2 files with the
extension code <.mpg>, <.mpeg>, or <.mod>*.
* <.mod> is an extension code used for the MPEG2
files recorded by JVC Everio camcorders.
• The stream format should conform to MPEG system/
program stream.
The file format should be MP@ML (Main Profile at
Main Level)/SP@ML (Simple Profile at Main Level)/
MP@LL (Main Profile at Low Level).
• Audio streams should conform to MPEG1 Audio
Layer-2 or Dolby Digital.
• The maximum bit rate for video signals (average) is 4
Mbps.

Playing JPEG files

• This unit can play back JPEG files with the extension
code <.jpg>, or <.jpeg>.
• It is recommended that you record afile at 640 x480
resolution.
• This unit can play back baseline JPEG files.
Progressive JPEG files or lossless JPEG files cannot be
played.
Playing MP3/WMA/WAV files
• This unit can play back files with the extension code
<.mp3>, <.wma>, or <.wav> (regardless ofthe
letter case-upper/lower).
• This unit can play back the files meeting the
conditions below:
- Bit rate:
MP3/WMA: 32 kbps - 320 kbps
- Sampling frequency:
48 kHz, 44.1 kHz, 32 kHz (for MPEG1)
24 kHz, 22.05 kHz, 16 kHz (for MPEG2)
48 kHz, 44.1 kHz, 32 kHz, 22.05 kHz (for WMA)
44.1 kHz (forWAV)
• This unit can show ID3 Tag Version
1.0/1.1/2.2/2.3/2.4 (for MP3).
• This unit can also show WAV/WMA Tag.
• This unit can play back files recorded in VBR (variable
bit rate).
• Files recorded in VBR have adiscrepancy in elapsed
time indication.
• This unit cannot play back the following files:
- MP3 files encoded with MP3i and MP3 PRO
format.
- MP3 files encoded with Layer 1/2.
- WMA files encoded with lossless, professional,
and voice format.
- WMA files which are not based upon Windows
Media® Audio.
- WMA files copy-protected with DRM.
- Files which have the data such as AIFF, ATRAC3,
etc.
• Disc/file information shown on the
external monitor
The following screens appear only on the external
monitor.
• CD
58