Bluetooth® Operations; Cellular Phone/Audio Player; Connecting A New Bluetooth Device - JVC KW-AVX810 Instructions Manual

Bluetooth® operations —
For Bluetooth operations, it is required to connect the
Bluetooth Adapter (KS-BTA200) to the CD changer jack
on the rear.
• Refer also to the instructions supplied with the
Bluetooth Adapter and the Bluetooth device.
• Refer to the list (included in the box) to see the
countries where you may use the Bluetooth®
function.
To use a Bluetooth device through the unit ("Bluetooth
PHONE" and "Bluetooth AUDIO") for the first time,
you need to establish Bluetooth wireless connection
between the unit and the device.
• Once the connection is established, it is registered in
the unit even if you reset your unit. Up to five devices
can be registered in total.
• Only one device can be connected at a time for each
source ("Bluetooth PHONE" and "Bluetooth AUDIO").
Connecting a new Bluetooth
device
Registration (Pairing) methods
Use either of the following items in <Bluetooth>
menu to register and establish the connection with a
device.
• Select "Bluetooth PHONE" or "Bluetooth AUDIO" as
the source to operate <Bluetooth> menu.
Open Make the unit ready to establish
a new Bluetooth connection.
The connection is established by
operating the Bluetooth device.
Search Make the unit ready to establish
a new Bluetooth connection.
The connection is established by
operating this unit.

Cellular phone/audio player

To register using <Open>
Preparation:
• Operate the Bluetooth device to turn on its Bluetooth
function.
• Make sure "NEW DEVICE" is selected. If not, press [5]
or [∞] to select it.
1
• You can also use MENU on the monitor panel.
2
3
Back
Go to other menu items
4
Enter a PIN (Personal Identification
Number)* code to the unit.
• You can enter any number you like (1-digit to
16-digit number).
* Some devices have their own PIN code. Enter the
specified PIN code to the unit.
34
Exit
Device Name
Exit