Disc Operations - JVC KW-ADV790 Instructions Manual

Disc operations

The disc type is automatically detected, and playback starts automatically (for some discs: automatic start depends
on its internal program).
If a disc does not have any disc menu, all tracks on it will be played repeatedly until you change the source or eject
the disc.
• Open the monitor panel.
<Openflilt> menu is displayed.
• By pressing and holding the button, you can
open the monitor panel and eject the disc.
• Press [OPEN].
Discs produce very little noise compared with other
sources. lower the volume before playing adisc
to avoid damaging the speakers by the sudden
increase of the output level.
•
TILT
~
/'
\. 61)
13
Insert a disc.
Label side
Monitor panel closes automatically.
If not, press [CLOSE].
Do not place your finger behind the monitor panel.
When playing back a multi-channel encoded disc,
the multi-channel signals are down mixed.
• You can tully enjoy multi-channel sound by
connecting an amplifier or a decoder compatible
with these multi-channel sources. also page
(1tW
OPERATIONS