JVC KW-ADV790 Instructions Manual page 61

• Sound signals emitted through the rear terminals
Through the analog terminals (Speaker out/REAR OUT}
2-channel signal is emitted. When playing multi-channel encoded disc, multi-channel signals are downmixed.
• DTS sound cannot be reproduced.
Through the DIGITAL OUT terminal
Digital signals (Linear PCM, Dolby Digital, DTS, MPEG Audio) are emitted.
• To reproduce the multi-channel sounds such as Dolby Digital, DTS, and MPEG Audio, connect an amplifier or a
decoder compatible with these multi-channel sources to this terminal, and set <D. Audio Output> correctly.
(I&' page 51)
*
Digital signals may be emitted at 20 or 24 bits (at their original bit rate) through the DIGITAL OUT terminal ifthe
discs are not copy-protected.
48 kHz, 16 bits stereo Linear PCM
Dolby Digital bitstream
DTS bitstream
MPEG bitstream
44.1 kHz, 16 bits stereo Linear PCM /
48 kHz, 16 bits stereo Linear PCM
DTS bitstream
Dolby Digital bitstream
32/44.1/48 kHz, 16 bits Linear PCM
32/44.1/48 kHz, 16 bits Linear PCM
44.1 kHz, 16 bits Linear PCM
61
48 kHz, 16 bits stereo
Linear PCM
48 kHz, 16 bits stereo Linear PCM
48 kHz, 16 bits stereo
Linear PCM
REFERENCES