Navigation Screen - JVC KW-ADV790 Instructions Manual

Navigation screen

You can also connect aNavigation System to the VIDEO IN terminal so that you can watch the navigation screen.
Preparation:
<Navigation>
Make sure
To view the navigation screen (and listen to the navigation guidance*)
Press DISP on the monitor panel repeatedly.
*
If your Navigation System is equipped with the voice gUidance function.
To display the operation buttons
• The operation buttons displayed on the screen vary among the playback sources.
Touch the screen (center portion).
• If no operations are done for about five seconds, the operation buttons disappear.
• The above buttons except [KEY] also work when they are not shown on the screen (while viewing the navigation
screen).
When <Navigation> is selected for <AV Input>
• You can use the source "AV-IN" for listening to an audio source connected to the LINE IN terminals.
• Some status messages such as volume level will not appear on the screen.
<AV Input>.
is selected for
page
(IrE
(~page
page 52)
(IrE
9)
• The aspect ratio of the navigation screen is fixed to
<Full>
regardless of the
49)
17) while viewing the navigation screen
Touch the screen (center portion).
page 52)
(IrE
43
<Aspect>
setting. page
(IrE
EXTERNAL DEVICES