Table of Contents
Advertisement
6.7
DEFINING SEQUENCE TABLES
Sequence tables store arrays of automatic camera selections. These sequences may be
run on any output video channel. The sequences may also be used as index/lookup
tables for macro programming.
A total of 999 separate scan sequences can be created in the system, each of which can
contain ninety-nine (99) entries.
Selection of the Sequence Tables tab opens the file for defining sequences. The details
for each field in the file are described below.
SEQ
Type
Rev. B
Figure 6.5: Sequence Table Tab
Sequence Tables
This field serves as a reference number/identifier for the sequence table;
it is not a changeable field.
There are three kinds of sequence types available:
Scan - During a SCAN sequence operation, camera selection entries are
wrapped around when the end of the scan sequence is reached.
This mode of operation continues until the scan sequence is halted.
Tour - During a TOUR sequence, the scan sequence is stepped through
only once.
Index - When INDEX is selected for this field, it indicates that the table is
used to hold information for complex macro programming.
6-20
HMXMC001013
31-Mar-06
Advertisement
Table of Contents
