Table of Contents
Advertisement
Printer Errorlog
Reporting
Rev. B
Special Parameters
If a printer is connected to the MAXPRO-Net Server, it can be enabled to
automatically report alarm events, operator sign on/off and error log
messages. Click on the Printer - Errorlog Reporting field to set these
options.
Printer Reporting Tab
Alarm Group – enter the range of alarm groups (1-99) that will be
reported to the printer. For a print out of all groups, type ALL in this
field.
Note: If automatic event printing is not required, but access to
the printer is still needed from within the macro environment,
enter an unused alarm group number in the alarm group field.
Errorlog Printing – If this field contains a checkmark, error log messages
are sent to the printer. The type of error log messages sent to the
printer can be defined by clicking on the ERRORLOG REPORTING
tab.
Sign On/Off – If this field contains a checkmark, all operators that sign
on and off the system are reported to the printer.
6-47
HMXMC001013
31-Mar-06
Advertisement
Table of Contents
