Table of Contents
Advertisement
7.1
VIDEO INPUTS, CONTINUED
7.1.1
Fixed Camera
Camera(1) is defined as a fixed camera (no PTZ controls). Its video signal is physically
connected to video input 21 of subrack 11. This would be on the second stage of
cascading as subrack 10 is to be bypassed. It is not a network camera.
7.1.2
PTZ Camera
Camera(2) is defined as a PTZ camera. Pan, tilt, zoom, focus, preset views and
flashback controls are supported by this camera. This camera's Site receiver is identity
10 and connects to an RD-315 module located in slot 16 of subrack 40.
7.1.3
Pseudo Camera
Camera(3) is defined as a pseudo camera. This means that it identifies itself as camera
3 while producing the video picture from camera 2. Camera 2 has also been targeted to
preset view 99. Camera(3) is still considered as a fixed camera.
Rev. B
Figure 7.4: Fourth Page Of The 'Video Inputs' Tab
NOTE: Note that the WASH/WIPE and IRIS functions are
not enabled for this PTZ camera example Whatever
warning needed.
7-4
HMXMC001013
31-Mar-06
Advertisement
Table of Contents
