Honeywell MAXPRO-Net Commissioning Manual page 123

Valid Keyboard access to each logical group is configurable through entries in the Valid Keyboards panel.
Keyboards Each of the 99 keyboards may be given access by selecting its corresponding field.
Click on any field to toggle the keyboard access state. If a field contains a check mark, that
keyboard has access to the logical camera group. To select or deselect all keyboards, click on the
All button. When the keyboard access is configured, press the OK button. To exit the Keyboard
dialog box with making changes, press the Cancel button.
Rev. B
Logical Camera Selection
6-61 HMXMC001013
31-Mar-06