Table of Contents
Advertisement
7.13.6
Review Association
Review Keys for Keyboard 1 is defined in the Review Association tab.
Keycode 2 is defined as the Review Key for the Dedicated VCR, Keycode 3 for Logging
VCR, and Keycode 4 for the Standby VCR.
When the Keycode is pressed, the corresponding VCR recording is stopped and it
enters into Review state. The user can send all the control commands like Play, Rewind,
Forward to the review VCR. The stopped review VCR recording is continued by the
Standby VCR
Keycode 5 is defined as the Review Key End. When this key is pressed, the review is
stopped and the recording is continued. The Standby VCR is released from recording
the review VCR.
Keycode 6 is defined as Zero Back Key and Monitor 7 is defined as Review Monitor.
Rev. B
Figure 7.25: The 'Review Association' Tab
7-47
HMXMC001013
31-Mar-06
Advertisement
Table of Contents
