Table of Contents
Advertisement
3.8.5
Standard device control, continued
To control a standard device, the associated relay output module located in an I/O
subrack must be allocated.
3.8.6
Smart Device Control
Similar to a standard device, this is another device type that can be allocated to various
equipments. To control a smart device, the associated peripheral control interface (PCI)
located in an I/O subrack must be allocated.
Up to (32) separate control functions can be used to control a smart device. Using the
(PCI) module, this can be as an RS-232 serial interface to one smart device, or as infra-
red control of up to eight separate smart devices.
3.8.7 Live Update Feature
Live Update Feature enable the Operator to do the Configuration changes in SetMax and
upload the new configuration details to MAXPRO-Net Server with out restarting the
MAXPRO-Net Server.
3.8.8 MaxMon Utility
MaxMon utility allows users from different locations to connect to the MAXPRO-Net
server and perform remote diagnostic operations.
MaxMon supports the following functionalities:
•
Online transaction – This is the MAXPRO-Net internal information that enables the
operator to debug the system.
•
Keyboard emulation – It is Equivalent to the keyboard. A Valid Operator can login
through Keyboard Emulation and execute commands like the Keyboard.
•
Status information - The Status Information dialog box provides the details about
input devices, which are connected to the MAXPRO-Net system, along with their
status and the configuration summary of the devices connected.
•
Alarms - Alarm Inputs are external inputs to the video system. These inputs are
monitored by the video system. Whenever there is a change in state, an alarm will
be generated. MaxMon Alarm input dialog box displays all the configured Alarms.
The alarms can be enabled or disable from MaxMon.
Rev. B
Note: This is done in the video input table of SETMEX
configuration editor program. (Refer to section 6.2)
Note: This is done in the video input table of SETMEX
configuration editor program. (Refer to section 6.2)
3-21
HMXMC001013
31-Mar-06
Advertisement
Table of Contents
