Table of Contents
Advertisement
7.11 LOGICAL CAMERA, CONTINUED
7.11.1
LGROUP 1
LGROUP 1 is Logical group of cameras defined using Logical Camera Selection tab.
The Entire group of camera can be selected by pressing the intercept key (10) followed
by pressing the selection number (1). Then the first camera defined in the selection
group will be displayed on the Current Monitor. The Macro for the "Alt" Key [<LOG-
CAM-ALT>] should be defined in the "Intercept Keyboard Tab". Pressing the "Alt" Key,
then the second camera defined in the selection group will be displayed, the above step
can be repeated to view the rest of camera defined in the group.
LGROUP 1 can be configured with 'n' number of Selection Entries, each with a unique
Selection number.
7.12 ETHERNET PORT
The System Controller uses the Ethernet ports to communicate with the network Nodes.
Ethernet Port configuration should be done on one of the two network nodes.
The following table shows examples of how Ethernet Port Configuration is defined.
Rev. B
Figure 7.19: The 'Ethernet Port' Tab
7-38
HMXMC001013
31-Mar-06
Advertisement
Table of Contents
