Multitech MultiModem MT5600ZDXV Owner's Manual page 47

Command: -Q n
Values:
Default:
Description:
*This command is included only for compatibility and performs no function.
Command: -SEC=n Enable/Disable MNP10-EC
Values:
Default:
Description:
* -SEC=1,[<tx level>] where <tx level> is an optional transmit level
subparameter (transmit level range is 0 dBm to -30dBm and is specified by
a set S91 value).
Command: @M n MNP 10 Initial Cellular Power Level Setting
Values:
Default:
Description:
*This command is included only for compatibility and performs no function.
Command: :E n
Values:
Default:
Description:
*This command is included only for compatibility and performs no function.
Command: * B
Values:
Description:
-K1 Enables V.42 LAPM to MNP 10 conversion.
-K2 LAPM answer mode detection phase.
MNP 10 Enable Fallback to V.22 bis/V.22
n = 0 or 1
n/a
-Q0 n/a
-Q1 n/a
-SDR=n
n/a
-SEC=0 Disables MNP 10-EC
-SEC=1 Enables MNP 10-EC
n = 0-30
n/a
@M0n/a
,
,
,
@M30 n/a
MNP 10 Compromise Equalizer Enable Command
n = 0 or 1
n/a
:E0 n/a
:E1 n/a
View Numbers in Blacklist
n/a
This command requests the modem to return a list of
blacklisted numbers to the DTE.
den numbers as defined by country requirements will
Permanently forbid-