Communications Software; Installation Process; Mt5600Zdxv Connections - Multitech MultiModem MT5600ZDXV Owner's Manual

1. Never install telephone wiring during a lightning storm.
2. Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
3.Never touch uninsulated telephone wires or terminals unless the telephone
line has been disconnected at the network interface.
4.Use caution when installing or modifying telephone lines.
5.Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electrical shock from lightning.
6.Do not use the telephone to report a gas leak in the vicinity of the leak.
2.1.5

Communications Software

You will need data communications (datacomm), fax communications
software and an appropriate application software package to access the
Personal Voice-Mail features of the MT5600ZDXV. You must have Microsoft
Windows 3.1 or later to run these programs. The MT5600ZDXV is also
compatible with datacomm and fax programs you may already own.
2.2

Installation Process

The installation of the MT5600ZDXV consists of making the physical connections
necessary to render the modem functional with your computer. This includes
making the proper serial, phone line, and power connections.
POWER
Power Connector
(to Transformer)
To install your MT5600ZDXV:
RS232
DB25 to Computer
Figure 2-2. MT5600ZDXV Connections
PHONE LINE
RJ11/PSTN Connection
RJ11/Phone Connection