Application of Disassembly
20
Removal of Z pulse motor
1. Remove the 2 screws 1, and then remove the Z pulse motor 1 from the
base holder assy..
2. Remove the lead wire sub assy. 2 from the Z pulse motor 1.
21
Removal of Lock nut
1. Remove the lock nut 1 from the base holder assy..
2. Remove the screw 1.
22
Removal of Shaft bushing
1. Remove the 2 screws 1, and then remove the shaft bushing 1 from the
base holder assy..
Needle-presser module
1
1
2
1
1
1
1
3 - 41