Attachment Of Plate Spring; Assembly Of Upper Shaft Assy; Assembly Of Tension Pulley Assy - Brother CE-5500PRW Service Manual

Application of Assembly
1

Attachment of Plate spring

1. Set the adjusting plate 1 and the plate spring 2 in this order from the
inside of the rear cover assy. with the 2 screws 1.
2. Fully tighten the adjusting screw 3 to the plate spring 2.
1
2

Assembly of Upper shaft assy

1. Attach the pulley 2 to the upper shaft assy. 1.
3

Assembly of Tension pulley assy

1. Align the boss 3 of the tension pulley holder 2 with the hole of the
tension pulley assy. 1, and then temporarily tighten the screw 1.
*Key point
• Fully tighten the screw 1 after performing "4 - 4 Adjustment :
Timing belt tension".
1
Needle bar, presser mechanism / Upper shaft mechanism
Taptite, Bind B
M4X10 0.78 – 1.18 N·m
Screw, Pan (S/P washer)
M4X8 Hand start
Torque
1
Torque
1
2 3 1
1
3
1 2
2
3
3 - 63