Attachment Of Rubber; Attachment Of Z Zigzag Cam - Brother CE-5500PRW Service Manual

Application of Assembly
4

Attachment of Rubber

1. Attach the rubber 1 to the shaft 2 of the base holder assy..
5

Attachment of Z zigzag cam

1. Set the Z zigzag cam 1 to the shaft 2 of the base holder assy..
*Key point
• Check that the match mark 3 on the Z zigzag cam 1 Align
the match mark 5 on the Z pulse motor gear 4.
2. Attach the retaining ring E3 to the shaft 2 of the base holder assy..
Apply EPNOC AP (N) 0 to all of the sliding part of
the Z zigzag cam pin.
Apply EPNOC AP (N) 0 to all of the Z zigzag cam.
Apply EPNOC AP (N) 0 to the teeth around the Z
zigzag cam gear.
3 - 82
Needle-presser module
Bead
XC8387***
Bead
XC8387***
Bead
XC8387***
1
2
1 2 Retaining ring E3
1 3
5 4