Attachment Of Bh Switch Assy; Attachment Of Lead Wire Assy: Ground; Attachment Of Thread Slider Guide - Brother CE-5500PRW Service Manual

Application of Assembly
19

Attachment of BH switch assy

1. Set the BH switch assy. 1 to the base holder assy. with the screw 1.
*Key point
• Check that the boss part 3 of the BH switch holder assy.
engaged with the positioning hole 2 of the BH switch assy.
1.
• Refer to "4-17 Adjustment : BH lever switch position".
1
20

Attachment of Lead wire assy: ground

1. Set the lead wire assy: ground 1 to the base holder assy. with the screw
1.
2. Bind the each lead wire with the 5 bands 2.
1
21

Attachment of Thread slider guide

1. Set the thread slider guide 1 to the needle bar supporter assy. 2 with the
screw 1.
1
Needle-presser module
Screw, Pan (S/P washer)
M4X8 1.18 – 1.57 N·m
Screw, Pan (S/P washer)
M4X8 1.18 – 1.57 N·m
Taptite, Bind B
M3X5
0.59 – 0.78 N·m
Torque
Torque
Torque
2 3
1 1
1
1
2
2
1 2
1
3 - 91