Automatic Lock Stitch Setting; Thread Color Sorting - Brother PR1055X Operation Manual

Automatic lock stitch setting

When the machine is purchased, it is set to automatically
embroider lock stitches at the beginning of the pattern, before
embroidering after each thread color change, and before
trimming the thread.
■ To change the lock stitches being embroidered
at the beginning of the pattern, at the
beginning of embroidering each thread color
change and at the beginning of embroidering
after the thread trim.
a Touch so that it changes to
• Each touch of the key turns the setting either on or off.
Automatic lock
stitch setting turned
on
Memo
• If the first stitch length is less than 0.8 mm (1/32
inch), the lock stitch won't be inserted.
• If [Thread Trimming] is set [OFF] in the settings
screen, the lock stitch won't be inserted.
(page 123)
■ To change the lock stitches being embroidered
before the thread is trimmed.
a Touch so that it changes to
• Each touch of the key turns the setting either on or off.
Automatic lock
stitch setting turned
on
Memo
• The automatic lock stitch setting stays the same
until the key is touched to turn it off. The setting
specified before the machine is turned off remains
selected the next time that the machine is turned
on.
• If [Thread Trimming] is set [OFF] in the settings
screen, the lock stitch won't be inserted.
(page 123)
.
Automatic lock
stitch setting turned
off
.
Automatic lock
stitch setting turned
off

Thread color sorting

You can embroider while replacing the thread spool a
minimal number of times.
Before starting to embroider, touch
settings screen to rearrange the embroidering order and sort it
by thread colors.
Embroidery screen
Embroidering settings screen
Embroidery screen
BASIC EMBROIDERY
in the embroidering
71
2