Motor Belt Tension - Brother CE-5500PRW Service Manual

Adjustment
[Adjustment standard]
The belt deflection must be 3 to 4 mm when pushing the center of the motor belt with a force of 0.98N (100g).
[Adjustment procedure]
1. Remove the front cover.
2. Remove the power supply unit.
3. Loosen the 2 screws (giza tite 5 x 16) of the motor holder.
4. Move the motor holder up and down, to adjust the belt deflection is 3 to 4 mm when pushing the center of the
motor belt with a force of 0.98N (100g).
5. Tighten the 2 screws (giza tite 5 x 16) of the motor holder.
XC2277001
Motor holder

Motor belt tension

Push-pull gauge (5N)
3 - 4mm
0.98N (100g)
Giza tite 5 x 16
4 - 5