Attachment Of Feed Arm B Assy; Attachment Of Feed Arm A Assy - Brother CE-5500PRW Service Manual

Application of Assembly
2

Attachment of Feed arm B assy

1. Set the polyester slider 2 and the feed arm B assy. 3 to the shaft of the
feed arm A assy. 1, and then attach the retaining ring CSTW-3.5.
Lubricate the feed arm A assy. shaft with FBK OIL
RO 100.
Lubricate the feed arm B assy. shaft with FBK OIL
RO 100.
3

Attachment of Feed arm A assy

1. Insert the feed arm A assy. 1 from the back side of the base plate assy.,
and then set the feed regulator slide shaft 3 of the feed arm B assy. 2 to
the groove of the feed adjuster 4.
2. Insert the horizontal feed shaft 5 into the feed arm A assy. 1, the
"washer, thrust 6" and the base plate assy. from the right side, and then
align the screw hole on the feed arm supporter shaft 7, and then attach it
with the screw 1.
3. Insert the "washer, thrust 8" and the set collar 9 into the horizontal feed
shaft 5, and then attach it with the screw 2.
*Key point
• Attach the feed arm A assy. 1, the "washer, thrust 6" and the
"washer, thrust 8" so that it can sandwich with the base plate
assy. and the set collar 9.
• Check that it is not a wobble, and it moves smoothly.
Apply OILER to the 2 sections where the
horizontal feed shaft is inserted in feed arm A.
1
2
3 - 68
Feed and rotary module
Screw, Bind
M3X12
Set Screw, Socket (CP)
M4X4
Retaining ring CSTW-3.5
1-2 drops
XC8388***
1-2 drops
XC8388***
1
Each 1-2 drops
XZ0206***
7
Torque
0.78 – 1.18 N·m
Torque
0.78 – 1.18 N·m
5
3
2
4
3 2
5 1
1
1
6 8
2
9