Figure 3-7. Removing and Installing the Cooling Shroud
1
1
screws (4)
3
cooling shroud
Installing the Cooling Shroud
1 Align the cooling shroud around the sides of the heat sink and along the
memory slots and lower it into the system. See Figure 3-7.
2 Secure the cooling shroud using the four screws. See Figure 3-7.
3 If applicable, connect the internal hard drive cables.
4 Close the system. See "Closing the System" on page 59.
5 Reconnect the system and peripherals to their electrical outlets and turn
on the system.
2
2
Installing System Components
3
internal hard drives (2)
61