Server Menu - Dell PowerEdge C2100 Hardware Owner's Manual

Server Menu

NOTE:
Delay Time, Minimum time, and Maximum time are only shown in SETUP
screen when AC Power Recovery Delay is set to User define. The selection of
Restore on AC Power Loss setup to Power-on or Last State takes 60 seconds for
running iBMC initialization after AC Power on.
Option
Status of iBMC
IPMI Specification
Version
iBMC Firmware Version
Set iBMC LAN
Configuration
Remote Access
Configuration
Restore on AC Power
Loss (Power Off default)
Power Staggering
AC Recovery (Immediate
default)
Power On Delay
View iBMC System
Event Log
Clear iBMC System
Event Log
Event Logging
(Enabled default)
ECC Event Logging
(Enabled default)
PCI Error Logging
(Enabled default)
Description
Displays the status of iBMC.
Displays the iBMC supported IPMI version.
Displays the firmware version of iBMC.
Input for Set LAN configuration command.
Configures remote access.
Restores the AC power setting. The options are Power
Off, Power On and Last State.
Selects the time of system power on after iBMC initiates.
Immediate: powers on directly after iBMC initiates.
Random: randomly selects time to power on.
User define: allows the user to select the time.
Sets the AC power recovery delay time.
Displays all events in the iBMC Event Log.
Clears all events in iBMC System Event Log.
Enables or disables BIOS to record Event Logging.
Enables or disables ECC Event Logging.
Enables or disables PCI Error Logging.
Using the System Setup Program
47