Power And System Board Status Codes - Dell PowerEdge C2100 Hardware Owner's Manual

Power and System Board Status Codes

The LEDs on the system front and back panel display status codes during
system startup. All systems share the same LEDs on the front and back panel.
Table 1-6 lists the status associated with the codes.
Table 1-6. Power and System Board Indicator Codes
Power-On Indicator
Steady green, amber off
Green off, blinks amber
Green, blinks amber
Table 1-7. System Identification Indicators
System Identification Indicator
Steady blue
Blinks blue
Blinks blue continuously (four
seconds on/off
Blue off
Table 1-8. Power Indicator Codes
Power Indicator
Steady green
Steady yellow
Condition
Power is on.
iBMC critical condition event in power
off mode (S4/S5).
iBMC critical condition event in power
on mode (S0/S1).
Condition
IPMI OEM command is set.
Option on Web is chosen.
Identify button is pressed.
IPMI chassis Identified command is executed.
S3 Mode (4s/1s Interval).
Power event in power standby mode (S3).
Turned off by IPMI chassis identify command
or ID button press identification off.
Condition
Power is on.
Power supply faulty
(UVP/OVP/OCP/SCP/OTP/Fan Fault).
About Your System
17