ProForm HYBRID TRAINER User Manual page 12

13. Hold the Console Bracket (79) near the Console
Post (73). Insert the Main Wire Harness (45)
upward through the Console Bracket.
Tip: Avoid pinching the Main Wire Harness
(45). Insert the Console Bracket (79) into the
Console Post (73).
14. Have a second person hold the Handlebar
(53) near the Console Post (73). Insert the indi-
cated wire tie into the hole in the Console Post,
and then pull the wire tie out of the Console
Bracket (79).
Continue to pull the wire tie until the Pulse Wires
(68) are routed into the Console Post (73) and
through the Console Bracket (79).
Tip: Avoid pinching the Main Wire Harness
(45). Attach the Handlebar (53) to the Console
Post (73) and the Console Bracket (79) with
two M8 x 20mm Screws (34) and two M8 Split
Washers (42).
13
Avoid pinching
the Main Wire
Harness (45)
14
45
79
73
12
79
45
73
53
34
42
68
Wire
Tie
Avoid pinching
the Main Wire
Harness (45)