Copying From A Camcorder - Samsung DVD-HR737 Instruction Manual

Copying from a Camcorder

You may control the Camcorder using the IEEE1394 (DV)
interface.
Connect the DV output jack of your camcorder to the
1
DV input jack on the front of your HDD & DVD
RECORDER using a DV cable.
2
Press the HDD or DVD button.
If you select DVD, press the OPEN/CLOSE button and
place a recordable disc on the disc tray. Press the
OPEN/CLOSE button to close the disc tray. Wait until
LOAD disappears from the front panel display.
3 Press the REC MODE button repeatedly to select
the recording speed(quality).
© SP © LP © EP © XP
Record Mode SP(35:12)
80 - English
4 Press the INPUT SEL. button to select DV.
If the input is set to DV, a playback/record menu that
enables camcorder control appears on the top of the
screen.
DV
The DV device is connected
MOVE
5 Select the Play (√) icon on the upper part of the
screen to playback the camcorder and find the
starting position to copy.
To start recording, use the œ √ buttons to select
6
Record ( G ) icon in the top side of the screen, then
press the OK button.
You can press the REC button of the remote control
to start recording.
- To stop recording -
Press the STOP ( ) button to stop or finish a
recording in progress.
• When using DVD-RW/-R discs, the message
"Updating the information of disc. Please wait for
a moment" is displayed.
To display playback related icons on the
I
screen, press any direction button on the
NOTE
remote control.
RETURN