Case 3 : Component Video Output Jacks; Other Type Of Connecting The Audio Output Cable; Case 1 : Connecting To Your Tv - Samsung DVD-HR737 Instruction Manual

Case 3 : Component Video output
jacks
1. Connect Component video cables(not supplied)
between the COMPONENT OUT(Y,P
HDD & DVD RECORDER and COMPONENT
IN(Y,P ,P ) jacks on your TV.
B R
• You will enjoy high quality and accurate colour
reproduction images.
2. Connect audio cables (white and red) between the
AUDIO OUT jacks on the HDD & DVD
RECORDER and AUDIO IN jacks on TV (or AV
amplifier).
(See pages 22~23).
3. After connecting, refer to the pages 41~43.
green
blue
red
Make sure that the colour coded
I
connections match. The Y, P
NOTE
component output jacks of your HDD &
DVD RECORDER must be connected to
the exact corresponding component input
jacks on your TV.
Progressive setting is only available when
I
the Video Out is set to Component. (See
pages 41~43)
22 - English
Other type of connecting
the Audio output cable
,P ) jacks on
B R
There are several ways to output audio signal not
using scart cables. Select the audio connection that
best suits you below.

• Case 1 : Connecting to your TV

• Case 2 : Connecting to a stereo amplifier with AV
• Case 3 : Connecting to an AV amplifier with a
Manufactured under licence from Dolby
Laboratories. "Dolby" and the double-D symbol
are trademarks of Dolby Laboratories.
"DTS" and "DTS Digital Out" are trademarks of
Digital Theatre System, Inc.
Case 1 : Connecting to your TV
If your TV has audio input jacks, use this connection.
, P
B R
output jacks
digital output jack
yellow
white
red