Life Fitness 8500 Service Manual page 96

Step 15
Rotate the LEFT ROCKER ARM (B) to its fullest rear position.
Locate one FRONT CLEVIS COVER (#21) and one BACK
CLEVIS COVER (#22). Position the BACK CLEVIS COVER at
the LEFT CLEVIS JOINT (J). Hook the bottom tabs of the
FRONT CLEVIS COVER into the bottom of the BACK CLEVIS
COVER and pivot the FRONT CLEVIS COVER upward to fully
meet the BACK CLEVIS COVER. Secure the CLEVIS
COVERS to the LEFT ROCKER ARM using two PHILLIPS
PAN HEAD SCREWS (#3). Tighten the screws securely.
PRE-OPERATION CHECKLIST
4 Ensure that all fasteners are tight.
4 Make sure the CROSS-TRAINER is properly leveled and stable.
(Refer to the Operation Manual)
4 Ensure that the Leveler Jam Nuts are tight.
(Refer to the Operation Manual)
4 Read the entire Operation Manual before using the Cross-Trainer.
Before attempting to operate your Cross-Trainer, it is imperative that you familiarize yourself with the
contents of the Operation Manual. If your Cross-Trainer does not respond as described in the
OPERATION MANUAL, contact the nearest Life Fitness service center as listed in the Operation Manual.
8
B
3 J
21
22 3